2y3k Review

Notice: As an Amazon Associate I earn from qualifying purchases.

The best way to keep your computer cool

Your computer functions like an engine. The more you use it, the more it heats up. Just like every engine, there are always provisions to keep it cool.

Although personal computers have a built-in cooling system, if not managed properly, a personal computer can malfunction due to overheating. To make sure your PC stays cool, we've come up with these 11 ways to keep your PC cool.

To keep your computer cool, all you need to do is follow the guidelines provided below and you will notice a difference in your computer's performance.

Note: A cool running computer is a happy computer.

Allow air flow

The easiest thing you can do is to give your computer room to breathe by evacuating any obstructions to airflow. Make sure that nothing is sitting on any side of the computer, especially the back. A large portion of the hot air flows out of the back end of the PC case. There should be at least 2-3 inches of space on either side, and the back should be completely open and unobstructed.

If your PC is enclosed in a work area, make sure the entryway is not closed all the way. Cold air enters from the front and sides of the case. If the entryway is closed all day, hot air tends to re-enter the work area and the computer gets hotter the more it runs.

Running your computer with the case closed

An urban legend about computer cooling is that running your PC with the case open will make it colder. This seems sensible - if the case is open, there will be more airflow, which will help keep the PC cooler.

The missing piece of the puzzle here is dust. When the case is opened, the buildup and debris stops the cooling fan faster than when the case is closed. This causes the fan to back up and flip over much faster than expected. A stopped fan does a terrible job of cooling your tall PC pieces.

Reality proves that running your PC with the case open may have a little wiggle room from the start, nevertheless, the fan development prologue has an obvious progressive and important impact on long-term temperatures.

Clean your PC

The fan inside your PC is used to keep it cool. Do you realize what turns the fan off and stops it at the end? Dust - as residue, pet hair, etc. Everything finds its way into your PC, and quite a lot of it stops on a handful of fans.

One of the best ways to cool your PC is to clean the internal fan. There is a fan on top of the CPU, one inside the power supply, and usually at least one in the front and back of the case.

Simply turn off your computer, open the case, and use canned air to expel the mud from each fan. If your computer is really dirty, go outside and clean it, otherwise all the dirt will settle elsewhere in the room and in the long run, come back into your computer.

Move your computer

If the area your computer is running in is just too hot or messy? There are times when your only option is to move your computer. A cooler and cleaner room-like territory may be fine, but you may need to consider moving the PC somewhere else entirely.

If moving your PC isn't an option at all, keep checking back for more tips.

Moving your PC could hurt the delicate components inside if you're not careful. Be sure to unplug everything, don't transport a lot of things within double-quick range, and put things down carefully. Your main concern is your computer case, which houses all the important components such as your hard drive, motherboard, CPU, and so on.

Upgrade your CPU fan

Your CPU is probably the most fragile and expensive part of your computer. In addition, it is also the most likely to overheat. Unless you have now replaced your CPU fan, the fan currently in your computer is most likely a basic fan that only cools your processor enough to make it work properly and is accepted to run it at full speed.

Many organizations sell huge CPU fans that help keep CPU temperatures lower than the fans introduced in industrial facilities.

Install a case fan (or two).

A case fan is simply a small fan that attaches from the inside to the front or back of a personal computer case.

The case fan helps move air through the PC, and if you review from the initial few tips above, this is the ideal way to keep those expensive components from becoming overheated.

Introducing two case fans, one to send cool air into the PC and the other to send hot air out of the PC, is an exceptional way to keep the PC cool.

Introducing a case fan is much easier than introducing a CPU fan, so don't be reluctant to get inside your PC to handle this job yourself.

Installing a case fan is not an option for PCs or tablets, but a cooling pad is a very good aid.

Stop overclocking

If you don't know what overclocking is, you probably aren't doing it, so you don't need to stress about it.

To all of you: you are very aware that overclocking pushes your computer's capabilities to the limit. What you may not understand is that these advances directly affect the operating temperature of your CPU and some other overclocked components.

If you are overclocking your PC's hardware, but not avoiding the potential risk of keeping that device cool, we definitely recommend reconfiguring your device to the default settings for industrial facilities.

Replace the power supply

The power supply in your PC has a huge fan combined with it. It is from this fan that you feel the air flow when your hands are behind the computer.

If you don't have a case fan, the power supply fan is the main way that the hot air generated inside your PC can be exhausted. If this fan is not working, your computer will heat up quickly.

The shocking thing is that you can't simply replace the power supply fan. If this fan never works again, you will have to replace the entire power supply.

Installing Component Specific Fans

As it turns out, the CPU is probably the biggest heat generator in your computer, but other parts heat up too. Super fast memory and a very good quality graphics card can often give the CPU a run for its money.

If you find that your memory, design card, or some other part is generating a lot of heat, you can use a segmented clear fan to cool them. At the end of the day, if your memory is heating up, buy and introduce a memory fan. If your video card is overheating during constant interaction, switch to a larger design card fan.

As the device gets faster, so do the smoking parts. Fan manufacturers know this and have a specific fan answer for almost everything inside your PC.

Install a water cooling kit

In most high-end PCs, the development of heat can become a problem, and even the fastest and most skilled fans can't cool the PC. in this case, the introduction of a water cooling kit can help. Water moves heat very well and can significantly reduce the temperature of the CPU.

"Water in a PC? That doesn't sound safe!" Do not stress that water or other liquids are completely encased in the exchange frame. The siphon circulates the cold liquid to the CPU where it can absorb the temperature, and then it sucks the hot liquid out of your PC where the temperature can dissipate.

Interested? Whether you've never updated your PC before or not, water cooling units are not difficult to introduce.

Installing a phase change unit

Phase change units are the most radical cooling advancement.

A phase change unit can be thought of as a cooler for your CPU. It uses a large number of similar advances to cool or even stop the CPU.

Phase change units, like the one envisioned here, cost from $1,000 to $2,000.

Comparable levels of effort for PC cooling items can be $10,000 or more!

Buying Guides

Products

Articles & Tips